Cina alta qualità Ds180 tipo secco pompa a vuoto rotativa a vite per ospedale pompa a vuoto freni

Descrizione del prodotto

DS Series Dry Screw Vacuum Pump 

Caratteristiche

1.Exhaust Path Is Short, Reduce The Deposition Of Reactants.
Comparing with other types of dry vacuum pump,DENAIR screw vacuum pump has the shortest gas path in the vacuum pump and that could reduce the contamination of process gas. Screw rotors can play as a powder transmission mechanism,we runs well even there has lots of contamination inside the pump.

2.The Optimal Linear Sealing, The Pump Performance.
Patented rotor profile can provide rotor excellent sealing effects thus a larger clearance is allowable in between.Pump rotor wesring and rotor jam by the process contamination can be reduced by larger allowable clearcance.

3.Simple Structure, Low Fault Rate And Easy Maintenance
Screw type vacuum is composed by a pair of screw rotor and isolation plates are required in different between rotors and isolation plates can also be avoided.Overhaul CHINAMFG dry pump is much easier than other type of dry pump,so the erpair time is shorter and the cost is saver.

4.Microcomputer Operation, Remote Monitoring, Considerate Protection
Microprocessor controller provides lots of pump parameters for running status monitoring.Pump can be easily operated and monitored by the operation panel.Remote control software can help the customer monitor the pump running status remotely.

DS Vacuum Pump Speed Curve

Vantaggi

1.Special cooling liquid cooling, to avoid the cooling water may cause corrosion to the hull. 

2.Mobile operation interface, convenient operation; Display and the actual work of vacuum pump and can be selected to both languages, according to the real close to the customer.

3.Catch the power connector, safe and convenient.

4.The nitrogen gas heater, make the vacuum pump is more suitable for CVD, PECVD and other semiconductor technique process.
5.The control signals and communication signal interface, remote monitoring was carried out on the vacuum. 

Application

1.The health care industry.

2.Lighting industry.

3.A variety of analytical instruments.

4.Electronics, semiconductor industry. 

5.The power industry.

6.Refrigeration industry.

Technical Prameters

Che cos'è il livello di vuoto e come si misura nelle pompe per vuoto?

Il livello di vuoto si riferisce al grado di pressione inferiore alla pressione atmosferica in un sistema a vuoto. Indica il livello di "vuoto" o l'assenza di molecole di gas nel sistema. Ecco una spiegazione dettagliata della misurazione del livello di vuoto nelle pompe per vuoto:

Il livello di vuoto viene tipicamente misurato utilizzando unità di pressione che rappresentano la differenza tra la pressione nel sistema di vuoto e la pressione atmosferica. L'unità di misura più comune per il livello di vuoto è il Pascal (Pa), che è l'unità SI. Altre unità comunemente utilizzate sono il Torr, il millibar (mbar) e i pollici di mercurio (inHg).

Le pompe per vuoto sono dotate di sensori di pressione o manometri che misurano la pressione all'interno del sistema del vuoto. Questi manometri sono progettati specificamente per misurare le basse pressioni che si incontrano nelle applicazioni del vuoto. Esistono diversi tipi di manometri utilizzati per misurare i livelli di vuoto:

1. Misuratore Pirani: I misuratori Pirani funzionano in base alla conduttività termica dei gas. Sono costituiti da un elemento riscaldato esposto al vuoto. Quando le molecole di gas si scontrano con l'elemento riscaldato, trasferiscono il calore, provocando una variazione di temperatura. Misurando la variazione di temperatura, è possibile dedurre la pressione e determinare il livello di vuoto.

2. Misuratore a termocoppia: I misuratori a termocoppia sfruttano la conducibilità termica dei gas, come i misuratori Pirani. Sono costituiti da due fili metallici dissimili uniti insieme, che formano una termocoppia. Quando le molecole di gas si scontrano con la termocoppia, causano una differenza di temperatura tra i fili, generando una tensione. La tensione è proporzionale alla pressione e può essere calibrata per fornire una lettura del livello di vuoto.

3. Manometro a capacità: I manometri a capacità misurano la pressione rilevando la variazione di capacità tra due elettrodi causata dalla deflessione di un diaframma flessibile. Al variare della pressione nel sistema di vuoto, il diaframma si sposta, modificando la capacità e fornendo una misura del livello di vuoto.

4. Misuratore di ionizzazione: I misuratori a ionizzazione funzionano ionizzando le molecole di gas nel sistema di vuoto e misurando la corrente elettrica risultante. La corrente ionica è proporzionale alla pressione e consente di determinare il livello di vuoto. Esistono diversi tipi di misuratori a ionizzazione, come quelli a catodo caldo, a catodo freddo e di Bayard-Alpert.

5. Misuratore di Baratron: I misuratori di Baratron utilizzano il principio della manometria capacitiva, ma con un design diverso. Sono costituiti da una membrana sensibile alla pressione separata da un piccolo spazio da un elettrodo di riferimento. La differenza di pressione tra il sistema di vuoto e l'elettrodo di riferimento provoca la deflessione del diaframma, modificando la capacità e fornendo una misura del livello di vuoto.

È importante notare che i diversi tipi di pompe per vuoto possono avere intervalli di pressione diversi e possono richiedere manometri specifici adatti alle loro condizioni operative. Inoltre, le pompe per vuoto sono spesso dotate di manometri multipli per fornire informazioni sulla pressione in diverse fasi del processo di pompaggio o in diverse parti del sistema.

In sintesi, il livello di vuoto si riferisce alla pressione inferiore alla pressione atmosferica in un sistema a vuoto. Viene misurato utilizzando manometri progettati specificamente per ambienti a bassa pressione. I tipi più comuni di manometri utilizzati nelle pompe per vuoto sono i manometri Pirani, i manometri a termocoppia, i manometri a capacità, i manometri a ionizzazione e i manometri Baratron.

\

How Do Vacuum Pumps Impact the Quality of 3D Printing?

Vacuum pumps play a significant role in improving the quality and performance of 3D printing processes. Here’s a detailed explanation:

3D printing, also known as additive manufacturing, is a process of creating three-dimensional objects by depositing successive layers of material. Vacuum pumps are utilized in various aspects of 3D printing to enhance the overall quality, accuracy, and reliability of printed parts. Here are some key ways in which vacuum pumps impact 3D printing:

1. Material Handling and Filtration: Vacuum pumps are used in 3D printing systems to handle and control the flow of materials. They create the necessary suction force to transport powdered materials, such as polymers or metal powders, from storage containers to the printing chamber. Vacuum systems also assist in filtering and removing unwanted particles or impurities from the material, ensuring the purity and consistency of the feedstock. This helps to prevent clogging or contamination issues during the printing process.

2. Build Plate Adhesion: Proper adhesion of the printed object to the build plate is crucial for achieving dimensional accuracy and preventing warping or detachment during the printing process. Vacuum pumps are employed to create a vacuum environment or suction force that securely holds the build plate and ensures firm adhesion between the first layer of the printed object and the build surface. This promotes stability and minimizes the risk of layer shifting or deformation during the printing process.

3. Material Drying: Many 3D printing materials, such as filament or powdered polymers, can absorb moisture from the surrounding environment. Moisture-contaminated materials can lead to poor print quality, reduced mechanical properties, or defects in the printed parts. Vacuum pumps with integrated drying capabilities can be employed to create a low-pressure environment, effectively removing moisture from the materials before they are used in the printing process. This ensures the dryness and quality of the materials, resulting in improved print outcomes.

4. Resin Handling in Stereolithography (SLA): In SLA 3D printing, a liquid resin is selectively cured using light sources to create the desired object. Vacuum pumps are utilized to facilitate the resin handling process. They can be employed to degas or remove air bubbles from the liquid resin, ensuring a smooth and bubble-free flow during material dispensing. This helps to prevent defects and imperfections caused by trapped air or bubbles in the final printed part.

5. Enclosure Pressure Control: Some 3D printing processes, such as selective laser sintering (SLS) or binder jetting, require the printing chamber to be maintained at a specific pressure or controlled atmosphere. Vacuum pumps are used to create a controlled low-pressure or vacuum environment within the printing chamber, enabling precise pressure regulation and maintaining the desired conditions for optimal printing results. This control over the printing environment helps to prevent oxidation, improve material flow, and enhance the quality and consistency of printed parts.

6. Post-Processing and Cleaning: Vacuum pumps can also aid in post-processing steps and cleaning of 3D printed parts. For instance, in processes like support material removal or surface finishing, vacuum systems can assist in the removal of residual support structures or excess powder from printed objects. They can also be employed in vacuum-based cleaning methods, such as vapor smoothing, to achieve smoother surface finishes and enhance the aesthetics of the printed parts.

7. System Maintenance and Filtration: Vacuum pumps used in 3D printing systems require regular maintenance and proper filtration to ensure their efficient and reliable operation. Effective filtration systems within the vacuum pumps help to remove any contaminants or particles generated during printing, preventing their circulation and potential deposition on the printed parts. This helps to maintain the cleanliness of the printing environment and minimize the risk of defects or impurities in the final printed objects.

In summary, vacuum pumps have a significant impact on the quality of 3D printing. They contribute to material handling and filtration, build plate adhesion, material drying, resin handling in SLA, enclosure pressure control, post-processing and cleaning, as well as system maintenance and filtration. By utilizing vacuum pumps in these critical areas, 3D printing processes can achieve improved accuracy, dimensional stability, material quality, and overall print quality.

What Is the Purpose of a Vacuum Pump in an HVAC System?

In an HVAC (Heating, Ventilation, and Air Conditioning) system, a vacuum pump serves a crucial purpose. Here’s a detailed explanation:

The purpose of a vacuum pump in an HVAC system is to remove air and moisture from the refrigerant lines and the system itself. HVAC systems, particularly those that rely on refrigeration, operate under specific pressure and temperature conditions to facilitate the transfer of heat. To ensure optimal performance and efficiency, it is essential to evacuate any non-condensable gases, air, and moisture from the system.

Here are the key reasons why a vacuum pump is used in an HVAC system:

1. Removing Moisture: Moisture can be present within an HVAC system due to various factors, such as system installation, leaks, or improper maintenance. When moisture combines with the refrigerant, it can cause issues like ice formation, reduced system efficiency, and potential damage to system components. A vacuum pump helps remove moisture by creating a low-pressure environment, which causes the moisture to boil and turn into vapor, effectively evacuating it from the system.

2. Eliminating Air and Non-Condensable Gases: Air and non-condensable gases, such as nitrogen or oxygen, can enter an HVAC system during installation, repair, or through leaks. These gases can hinder the refrigeration process, affect heat transfer, and decrease system performance. By using a vacuum pump, technicians can evacuate the air and non-condensable gases, ensuring that the system operates with the designed refrigerant and pressure levels.

3. Preparing for Refrigerant Charging: Prior to charging the HVAC system with refrigerant, it is crucial to create a vacuum to remove any contaminants and ensure the system is clean and ready for optimal refrigerant circulation. By evacuating the system with a vacuum pump, technicians ensure that the refrigerant enters a clean and controlled environment, reducing the risk of system malfunctions and improving overall efficiency.

4. Leak Detection: Vacuum pumps are also used in HVAC systems for leak detection purposes. After evacuating the system, technicians can monitor the pressure to check if it holds steady. A significant drop in pressure indicates the presence of leaks, enabling technicians to identify and repair them before charging the system with refrigerant.

In summary, a vacuum pump plays a vital role in an HVAC system by removing moisture, eliminating air and non-condensable gases, preparing the system for refrigerant charging, and aiding in leak detection. These functions help ensure optimal system performance, energy efficiency, and longevity, while also reducing the risk of system malfunctions and damage.

editor by Dream 2024-05-03