worm gear speed reducer

Solitary reduction worm gearing provides high ratio reduction with few moving parts in a close-coupled small drive. The right angle set up of driving-to-driven machine takes a minimum of space. Input and result shafts can be prolonged in either or both directions in horizontal or vertical plans adaptable to any mounting requirement. Efficient electric motor speeds are reduced to slow speed requirements of several industrial machines in a single reduction.
Product Features
Ratios 5:1 to 70:1
Hollow & Solid Output Shafts
Vertical & Horizontal Mounting
Fan Cooled (Standard)
Motor Mounts (C-Face Adapters or Scoops)
Cast Iron or Metal Housings
Products
The exclusive use of the involute Helicoid Thread form (with departing side contact) on the worm and gear provides for high efficiencies, and long service lifestyle. The hardened floor and polished alloy metal worm develops a soft, work hardened surface area on the bronze equipment. For this reason worm gears use in and improve with extented service while other gears are deteriorating. Ever-Power offers a wide selection of model configurations, sizes, ratios, and components from our standard products.
Fabricated Designs
If the application involves severe shock loads or feasible housing damage from external sources (as in steel mills or mobile products applications) Ever-Power can provide fabricated steel housings with up to a 48″ center distances. Fabricated housings provide optimum rigidity and strength that allows the transmission of higher horsepower levels than are possible with regular cast iron products. Extra heavy aspect plates connect the worm and equipment shaft bearing facilitates, assuring appropriate meshing of the apparatus under all load circumstances. In smaller sizes, fabricated metal reducers are interchangeable with Ever-Power regular cast iron reducers.
Custom Designs
Ever-Power can offer custom swiftness and reversed engineered reducers for the application, be it a fresh project or a direct drop-in alternative to a competitor’s velocity reducer. Fabricated steel reducers enable Ever-Power to complement a competitor’s footprint, centerline, and shaft elevation allowing a primary drop-in alternative saving the client time and money.
Long – Quiet Life
All worm gears in Ever-Power reducers are manufactured from phosphorous bronze. Our style also includes a hardened, floor and polished alloy metal worm. This combination develops a easy, work-hardened mating surface of the bronze equipment which enhances with prolonged service.
Worm gearing is a course of gear reducers that utilizes correct angle, nonintersecting shafts. This form of reducer provides simple and quiet procedure and permits the likelihood of large quickness reductions. These gears are available from stock in a wide variety of ratios, from as low as 4:1 to as much as 3600:1. The compact design and structure allows worm equipment reducers to be placed in a relatively small space. Thus, very high reductions in a restricted package size may be accomplished with this configuration. Our worm gear features the continuous sliding tooth action between worm and the teeth. This escalates the tolerance for large loads and shock loads. Worm gear drives offer users high reducing capacity for relatively low cost in comparison with some other types of gearing.
The usage of worm gearing extends across many industries including food, beverage and grain and has many applications. Some applications that utilize worm gearing are: conveyors, mixers and bucket elevators.
Ever-Power worm equipment reducer gearbox series foundation on years of encounters uses designed teeth surface with unsurpassed torque transfer functionality with great efficiency, efficency and price.Worm gear program transmits power through sliding contact, leading to extremely low vibration , noise, small backlash and self-locking property
-Housing:Onetime we casting creats great rigidity for severe impacts. Outer cooling fins and internal lubrication essential oil diversion channel design to increase heat dissipation.
-Worm Shaft: Manufactured with Carbon alloyed Metal S45C or SCM415, precison machined and carburized to HRC45 or HRC60, then for precision tooth grinding to ensure maximum contacting.
-Worm Wheel: Manufactured with Carbon alloy ALBC2, teeth are machined by precision CNC hobbing machine to sustain high impact.
A worm gear reducer is one type of reduction gear container which includes a worm pinion input, an output worm equipment, and includes a right angle output orientation. This kind of reduction gear box is normally used to have a rated motor velocity and produce a low speed output with higher torque worth based on the reduction ratio. They often can resolve space-saving problems because the worm equipment reducer is among the sleekest decrease gearboxes available because of the little diameter of its output gear.
worm gear reducerWorm equipment reducers are also a favorite type of swiftness reducer because they provide the greatest speed decrease in the smallest package. With a higher ratio of speed reduction and high torque output multiplier, it’s unsurprising that lots of power transmission systems utilize a worm equipment reducer. Some of the most common applications for worm gears can be found in tuning instruments, medical screening equipment, elevators, security gates, and conveyor belts.
SW-1 and SW-5
Torque Transmission offers two sizes of worm gear reducer, the SW-1 and the SW-5 and both can be found in a range of ratios. The SW-1 ratios include 3.5:1 to 60:1 and the SW-5 ratios include 5:1 to 100:1. Both these options are produced with tough compression-molded glass-fill worm gear speed reducer polyester housings for a durable, long lasting, light weight speed reducer that is also compact, noncorrosive, and nonmetallic.
Features
Our worm equipment reducers offer a choice of a good or hollow output shaft and feature an adjustable mounting placement. Both the SW-1 and the SW-5, however, can endure shock loading much better than other reduction gearbox designs, making them ideal for demanding applications.
Rugged compression-molded glass-fill up polyester housing
Light weight and compact
Non corrosive
Non metallic
Range of ratios
SW-1, 3.5:1 to 60:1
SW-5, 5:1 to 100:1
Grease Lubrication
Solid or Hollow output shaft
Adjustable mounting position
Worm Equipment Reducers also referred to as worm gearbox or worm rate reducers. Worm equipment reducers are used for speed reduction and increasing the torque for electrical motor drives. You can choose to mount your NEMA engine to the reducer utilizing the NEMA C encounter flange or use a coupling. If you want a coupling for the result or input shaft discover our coupling section for choosing the coupling. We offer four assemblies left hand and right hands and double result shaft and shaft insight and shaft output. Interchangeable with most worm gear manufactures. Discover data sheet in item overview for diamensions. If you don’t see your type, make sure you Contact Us.
8 Ratios Available from 5:1 to 60:1
7 Gear Box Sizes from 1.33 to 3.25″
Universally Interchangeable Style for OEM Replacement
Double Bearings Used on Both Shaft Ends
Anti-Rust Primer Applied Outside and inside Gearbox
Shaft Sleeve Protects All Shafts
S45C Carbon Steel Shafts
Flange Mount Versions for 56C and 145TC Motors
Ever-Power DDVM series triple-reduction worm gear acceleration reducers can be found in ratios from 5000:1 to 175,000:1 and middle distances from 7” to 20” (larger sizes available on request). Output torque ranges from 33,000 in lbs. for the 7” CD DDVM-70 to 582,900 in lbs for the DDVM-200. Mechanical HP input requirements are from 0.09 HP for the 175,000:1 7 in CD reducer to 6.25 HP for the 5000:1 20” CD unit. These reducers are available in four configurations: horizontal, vertical, shafted, and shaft installed.
These reducers are perfect for water/waste-water devices drive applications such as for example thickeners and clarifiers, which need a vertical down shaft. Other available configurations also make Ever-Power triple decrease reducers perfect for use on mixers, elevators, solar power panels, astronomical telescopes, indexing tables, hoists, conveyors, or various other process or materials handling systems where huge torques/gradual speeds are needed.
These reducers are also offered with a helical main reduction stage and so are termed the HDVM series
Product Features
Ratios 5000:1 to 175,000:1
HP from 0.09 to 6.25.
Output Torque to 583,000 in lbs.
Output RPM as low as 0.01 with a 1750 RPM input.
Ideal for ultra-slow velocity, high torque applications
8 Ratios Available from 5:1 to 60:1
7 Gear Box Sizes from 1.33 to 3.25″
Universally Interchangeable Style for OEM Replacement
Double Bearings Applied to Both Shaft Ends
Anti-Rust Primer Applied Inside and Outside Gearbox
Shaft Sleeve Protects All Shafts
S45C Carbon Metal Shafts
Flange Mount Models for 56C and 145TC Motors
Description
The HDR Series worm equipment reducers are used in low to moderate horsepower applications to reduce speeds and increase torque. Worm gear reducers can be found in direct or indirect drive, direct drive models are 56C or 145TC flange attach with either right, remaining or dual result shafts or a hollow bore result. The indirect drive models are shaft input-shaft result boxes for make use of with sprocket or pulley drive systems. They provide an effective low priced solution to speed reduction and increased torque, with higher tolerances for shock loading than helical equipment reducers.
In order to decide on a gearbox speed reducer, you will have to determine the required torque and assistance factor for the application. Click on “Specs” above for a table that will aid in identifying the service factor. For service factors above 1.0, multiply the required torque by the program factor.
Our regular 700 Series – the heart of Ever-Power swiftness reducer products – has been serving industry reliably for over 40 years. Its tested modular design has set the market standard for efficiency and is the most imitated item in the current worm gear quickness reducer marketplace. But why accept a knock-off when you’re able to have the original – from Ever-Power.
Specifications
11 basic solitary reduction sizes
8 basic double reduction sizes
1/6 – 25 HP
5:1 – 100:1 ratios single reduction
100:1 – 3600:1 ratios double reduction
Non-flanged, NEMA C-face quill, and coupled input styles
Projecting and hollow output shafts
Projecting diameters from 1/2″ to 2-1/4″
Hollow result bore diameters from 5/8″ to 3-7/16″ (with over 20 bore sizes in share)
Product Features
The 700 Series’ huge oil reservoir provides efficient heat dissipation and lubrication for longer operating lifestyle.
Its multi-position mounting versatility permits installation in virtually any position.
Housings are straddle-milled, best and bottom level, for precise alignment of horizontal and vertical bases.
Internal baffles assure positive, leak-free venting.
The 700 Series’ rugged housing, fabricated of fine-grained, gear-quality cast iron, provides optimum strength for maximum durability, as well as greater precision during worm and gear alignment.
Ever-Power 700 Series high-strength bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to improve thrust and overhung load capacities, sizes 713-760.
Our 700 Series’ high-strength steel output shaft assures convenience of high torque and overhung loads.
Pipe plugs allow easy fill, level, and drain in virtually any mounting position.
The 700 Series’ super-finished oil-seal diameters on both input and output shafts extend seal lifestyle.
Both 2D and 3D CAD drawings can be found in our eCatalog.
TheIncreased Quality! Industrial Ranked! Inexpensive!One-piece gearcase, without exterior ribs, is constructed of close-grained cast iron and for rigid gear and bearing support. It also offers excellent heat dissipation.Double lip, spring-loaded seals guard against oil leakage and prevent dirt from entering.Stepped shafts with oversized ball andtapered roller bearings.Carbon metal shafts for greater power.High tensile strength cast bronze worm wheel and hardened and ground alloy steel worm made intregal with the shaft for long and trouble-free life.Oil sight gauge for simple maintenance (unavailable on sizes 25 and 34).Factory oil packed.Every unit test run prior to shipment.Universal installation with bolt-on foot.Highly modifiable design.All this at substantially lower prices than you have already been accustomed to paying for reducers of lesser quality. Less

TAGs:

Mail: [email protected]

Professional production Roots Vacuum Pumps, rotary vane pump, rotary piston pump, liquid ring vacuum pump, Oil-free Air Compressor, Screw Compressor, Scroll Compressor Manufacturer and Supplier.