Worm Gear Slewing Drive For Timber Grab

The EP Greenhouse Gearbox is a compact and lightweight reduction gearbox with a built-in limit switch system that is ideal for assembly of a locally available electric electric motor. The Gearbox is utilized in manually-controlled or climate-controlled ventilation and display screen systems in greenhouses. The quick and easy-to-installEP Gearbox can be rainproof and windproof. The Gearbox has a high protection course (IP65) and can be used in an ambient temperature of 0-60 °C.

The low-noise Gearbox for Greenhouse has a gearwheel transmission and a worm wheel transmission, which are integrated in an aluminium precision housing. The self-braking worm wheel tranny means that the drive shaft is locked when the reduction gearbox is not running. The completely sealed reduction gearbox has an growth chamber with a diaphragm to keep the gear essential oil at a minimal pressure under all circumstances, even at high temps. Thanks to the usage of an growth chamber, the Gearbox could be installed in any placement. There are no limitations, since there is no dependence on a bleed plug. The sealed reduction gearbox keeps the apparatus oil of the Gearbox in optimum condition for its entire operating life time. The Gearbox is ideal for discontinuous use, working course s3-30%, with a maximum activation time of 25 minutes.

THE APPARATUS box reduction gearbox has an FT85 motor assembly flange, to which the right IEC standard motor can gear reduction motor certainly be installed (EN 50347).

The Gear box has a rotating limit switch system with operating switches and circuit breakers (NC contacts) for turning off by the end positions. The limit change system is installed within an integrated chamber and is certainly enclosed by an impact-resistant plastic-type material cover. The limit change system is accessible and simple to adjust. The limit switch system’s optimum switching range is certainly 40 or 64 revolutions of the drive shaft. The cabling is connected in spring-clip connections. The Gearbox comes with an IP68 M16 x 1.5 cable gland (5-9 mm cable) for the cable feed-through.

The Gearbox for greenhouse includes 16 teeth 5/8”x3/8” sprockets, keys and fasteners. The accompanying chain couplings and assembly plates can be found as accessories.

Maximum drive torque of 150 Nm or 450 Nm.
Rotational speeds of 3 or 5 rpm for a mains frequency of 50 Hz or 3.6 or 6 rpm for a mains frequency of 60 Hz in the event of app of 4-pole electric motor.
Protection class IP65.
May be used in ambient temperatures of 0-60°C.
Ideal for discontinuous use, operating class s3-30%, maximum activation time 25 a few minutes.
Equipped as standard with 16-tooth galvanised chain coupling 5/8″x3/8″.
FT85 motor assembly flange for installation of IEC standard motor (EN 50347).
Maximum switching selection of limit switch program 40 or 64 revolutions of the drive shaft.
IP68 M16x1.5 cable gland for cable feedthrough (5-9 mm cable).

TAGs:

Mail: [email protected]

Professional production Roots Vacuum Pumps, rotary vane pump, rotary piston pump, liquid ring vacuum pump, Oil-free Air Compressor, Screw Compressor, Scroll Compressor Manufacturer and Supplier.