What is a gear rack?

Gear rack is a special gear whose teeth are distributed in the strip.
1. The basic concept:
The rack can be divided into a spur gear rack and a helical gear rack, which are paired with a spur gear and a helical gear, respectively; the tooth account of the rack is normally a straight line rather than an involute (planar for the tooth surface) , equal to the indexing circle radius is infinite cylindrical gear.
2. The main features:
(1) Because the tooth profile of the rack is direct, each point about the tooth profile has the same pressure angle and is equal to the inclination angle of the tooth profile. This angle is called the tooth position and the standard value is 20°.
(2) The same pitch and modulus are given on the direct lines parallel to the very best line.
(3) A series parallel to the top type of the tooth and having a tooth thickness add up to the width of the tooth groove is named a dividing line (middle line), which really is a reference range for calculating how big is the rack.
3. The main parameters:
Groove width, high tooth tip, high root elevation, tooth elevation, tooth thickness, root radius, etc.
4. The decision of parameters:
(1) Whether the equipment is beating, the full tooth depth, the common normal collection, the tooth direction is qualified, the tooth pitch is poor, and the circumferential section mistake is out of tolerance.
(2) Whether the installation distance after the gears and racks are installed is suitable.
(3) The rack and gear meshing clearance should be 0.25* modulus.
(4) Whether the full tooth depth, runout, and common normal line of the rack are certified.
5. Processing methods:
Gear rack and pinion machining method:
(1) hobbing
(2) gear shaping
(3) shaving
(4) grinding teeth
(5) molars

TAGs:

Mail: [email protected]

Professional production Roots Vacuum Pumps, rotary vane pump, rotary piston pump, liquid ring vacuum pump, Oil-free Air Compressor, Screw Compressor, Scroll Compressor Manufacturer and Supplier.