Vapor Oil-Gas Recovery Vacuum Pump

Vapor oil and fuel recovery vacuum pump Software
Vapor oil and gas recovery vacuum pump is a relatively consummate pump for oil-gasoline recovery, working under the ambient temperature at -forty~60°C. It can be employed independently or as a part of oil-gas recovery method in fuel stations, which is primarily utilised for oil-gas recovery, to lessen pollution and conserve vitality.
With the developing need on taking edge of environmental pollution and strength properly, this Vapor oil and gasoline restoration vacuum pump will be applied to this discipline widely.

Structural Attribute

Attribute of NP80 collection oil-fuel recovery vacuum pump: a shaft dived by motor is fixed on the pump human body, and its one particular conclude in the pump entire body is fixedly linked a crank which is jointed to a relationship rod a piston in liner with reciprocating movement is fixed on the best of the link rod, and the liner is fastened in the pump entire body a valve seat assay above the piston has inlet valve and outlet valve which are check out valves. Aside from, the inlet cavity and outlet cavity on the pump physique are connected with the inlet valve and outlet valve respectively through a pipeline, the inlet cavity is connected with the coupling of an air eliminator, and one particular stop of the coupling is linked with the hose by means of the hose coupling the hose with inside and exterior casing is related with nozzle.

 

Construction diagram:

Note:  There are six electrical wires and five hues in WDVP-a hundred

 

1)      Blue ,white ,brown  connect  380 Voltage electrical power.

two)      There are two black electrical wires join 220 Voltage electricity.  (One connect 220 voltage power, another hook up Zero)

three)      The yellow one particular connects Serra.

four)      The relaxation (blue, white, brown) needn’t join.

5)      Only two blacks control the function.

 

Specification

 

l Rotary vane vacuum pump

l Pump with motor, no affect the gas dispenser regular procedure

l Compact dimensions, self-lubricating Overall performance

 

Technical Specification

 Model

Solitary PUMP Head

Double Pump Head

 Max. Flow Fee

65 L/Min

one hundred twenty L/Min

 Working temperature

-25~+fifty °C

 Max.Vacuum

.07MPa

 Motor Velocity

2800RPM

 Motor Energy

370W

 Power Source

380V/50Hz or 220V/50Hz

 Noise

≤70dB

 Connection

1/four”

three/8″

Attributes

 

Easy set up and upkeep: remove the 4 screws to eliminate the pump head for simple installation and maintenance High vacuum amount assures clearing of flooded vapor hoses. Available for Self-contained Suction Pump Dispenser and submersible Pump Dispenser. Self-contained & one section two electrical power provide, protected and efficient. Handles twelve fueling positions with 6 nozzles in simultaneous entire stream operation. Low sounds, sluggish temperature rise.

 

1) Strong applicability: a little and sturdy construction, the pump head can be set up at multiple angles, delivering much more convenience for the modification of the tanker b applies to ethanol gasoline, methanol gasoline.

2) Minimal noise layout: sound does not exceed 62 decibels.

three) Service life: Following stringent life and security test, the provider daily life is ≥60000 several hours.

4) Total safety actions: The fire escape valve is equipped with inlet and outlet ports.

 

Deal Knowledge

   Each Vacuum pump set by foaming,then in a carton.

 

Design

Size 1.026

N.W(kg)

G.W(kg)

Voltage

Single/Double

380V

Solitary

365*275*245

twelve.32

13.05

 

Double

490*275*245

fourteen.22

fourteen.ninety five

220V

Single

430*275*245

fourteen.32

15.05

 

Double

525*275*245

16.22

16.ninety five

 

TAGs:

Mail: [email protected]

Professional production Roots Vacuum Pumps, rotary vane pump, rotary piston pump, liquid ring vacuum pump, Oil-free Air Compressor, Screw Compressor, Scroll Compressor Manufacturer and Supplier.