Vapor oil and fuel recovery vacuum pump Application
Vapor oil and gas recovery vacuum pump is a relatively consummate pump for oil-fuel restoration, functioning underneath the ambient temperature at -40~60°C. It can be employed independently or as a portion of oil-gas recovery program in fuel stations, which is primarily utilized for oil-fuel recovery, to decrease air pollution and preserve strength.
With the expanding requirement on getting benefit of environmental pollution and vitality well, this Vapor oil and gas restoration vacuum pump will be utilized to this discipline commonly.
Structural Characteristic
Characteristic of NP80 sequence oil-gasoline restoration vacuum pump: a shaft dived by motor is mounted on the pump entire body, and its one conclude in the pump body is fixedly connected a crank which is jointed to a connection rod a piston in liner with reciprocating motion is mounted on the prime of the connection rod, and the liner is mounted in the pump entire body a valve seat assay above the piston has inlet valve and outlet valve which are verify valves. Aside from, the inlet cavity and outlet cavity on the pump body are linked with the inlet valve and outlet valve respectively by way of a pipeline, the inlet cavity is connected with the coupling of an air eliminator, and a single end of the coupling is connected with the hose through the hose coupling the hose with inner and exterior casing is connected with nozzle.
Construction diagram:
Observe: There are 6 electrical wires and five hues in WDVP-100
1) Blue ,white ,brown connect 380 Voltage electricity.
two) There are two black electrical wires hook up 220 Voltage energy. (One particular join 220 voltage electricity, an additional link Zero)
three) The yellow 1 connects Serra.
4) The relaxation (blue, white, brown) needn’t link.
5) Only two blacks management the function.
Specification
l Rotary vane vacuum pump
l Pump with motor, no influence the gas dispenser normal operation
l Compact measurement, self-lubricating Efficiency
|
CZPT Specification |
||
|
Model |
One PUMP Head |
Double Pump Head |
|
Max. Flow Charge |
sixty five L/Min |
120 L/Min |
|
Working temperature |
-25~+fifty °C |
|
|
Max.Vacuum |
.07MPa |
|
|
Motor Velocity |
2800RPM |
|
|
Motor Electricity |
370W |
|
|
Power CZPT |
380V/50Hz or 220V/50Hz |
|
|
Noise |
≤70dB |
|
|
Connection |
1/4″ |
3/eight” |
Characteristics
Effortless installation and upkeep: take away the 4 screws to remove the pump head for easy set up and maintenance High vacuum level assures clearing of flooded vapor hoses. Available for Self-contained Suction Pump Dispenser and submersible Pump Dispenser. Self-contained & single period two energy offer, protected and efficient. Handles 12 fueling positions with 6 nozzles in simultaneous complete movement operation. Low sounds, gradual temperature increase.
one) Sturdy applicability: a small and powerful structure, the pump head can be mounted at several angles, delivering a lot more usefulness for the modification of the tanker b applies to ethanol gasoline, methanol gasoline.
2) Reduced noise design and style: sound does not exceed sixty two decibels.
3) Provider daily life: Right after rigorous daily life and security examination, the provider existence is ≥60000 hrs.
four) CZPT security measures: The fire escape valve is outfitted with inlet and outlet ports.
|
Bundle Data |
Each Vacuum pump fixed by foaming,then in a carton.
|
|||
|
Model |
Size 1.026 |
N.W(kg) |
G.W(kg) |
|
|
Voltage |
Solitary/Double |
|||
|
380V |
Single |
365*275*245 |
twelve.32 |
thirteen.05 |
|
|
Double |
490*275*245 |
fourteen.22 |
14.ninety five |
|
220V |
One |
430*275*245 |
fourteen.32 |
fifteen.05 |
|
|
Double |
525*275*245 |
sixteen.22 |
sixteen.95 |
