Sier-Bath Constant Sleeve and Flanged Sleeve Couplings

Continuous Sleeve Series
Characteristics
Simple and affordable all steel form of gear coupling constructed having a single sleeve and two hubs
Comparatively easy installation
Precision minimize 20° stress angle gear teeth with minimal backlash
Most normal configurations can be found as stock objects
Angular misalignment of 1/2° per gear mesh (flex-plane)
Sizes 7/8 via twelve, to accommodate bore sizes up to and such as 12.50 inches
Interference fit (normal) and Clearance match on bores are available
Load Capacities range from 2,500 in-lbs as much as 2,520,000 in-lbs
Models for applications requiring horizontal and vertical orientation, full-flex, flex-rigid, mill-motor, disengagement, sliding hubs, Shear Pin, floating shaft, and spacers
Patented and tested BUNA N seal layout with reinforced washers bonded to the inside edges which positively retain lubricant and seal the interior from outside contaminants
Reinforced rubber seals with snap rings to hold in lubricant
Two snap rings made of hardened spring steel which securely hold the coupling collectively, are quick to put in or take out, nonetheless stand up to one hundred,000 lbs of end thrust
Inch and Metric bore sizes obtainable
Flanged Sleeve Series
Functions
Patented tooth kind for prolonged coupling daily life
Precision minimize 20° pressure angle gear teeth with minimal backlash
All steel sleeves and hubs (stainless steel obtainable)
Designs for applications requiring horizontal and vertical orientation
Most typical configurations can be found as stock items
Angular misalignment of 1-1/2° per gear mesh (flex-plane) as much as dimension 5.5, 3/4° for sizes six and over
Coupling sizes readily available by means of dimension 30 to accommodate bore sizes up to and together with 44 inches
Interference match (conventional) and Clearance match on bores can be found
Load capacities range from seven,600 in-lbs as much as 47,269,000 in-lbs
Exposed bolts typical on all sizes, shrouded available by request up to dimension six
Normal bolts supplied are treated to become corrosion resistant
Flanged sleeve couplings are interchangeable with marketplace standards
Piloted gear fit for higher speeds and much less vibration
Labyrinth all steel seal style and design in FL series
Inch and Metric bore sizes readily available
Regular Varieties and Sizes
Sier-Bath couplings are stocked in an assortment of configurations which involve C and F normal hubs and sleeves, Mill Motor hubs, Vertical fashion, Floating Shaft, and Spacer types. ’s excellent engineering staff make it feasible to support numerous extra coupling forms this kind of since the Brakedrum variety, Sliding Hub form, Shear Pin form, Jordan type, and custom lengths for non regular shaft separations. Additional dimension ranges and models to meet uncommon application needs can also be manufactured by to meet marketplace demands. Material can range from normal steel to alloy steel as well as stainless steel. The excellent simplicity from the coupling layout make this all doable.
Misalignment and End-Float Capability
The basic principle of Sier-Bath C and F sort couplings is just like that of other conventional versatile gear couplings. Whilst it truly is desirable to align shafts as accurately as possible, the goal of any flexible coupling would be to absorb probable angular, parallel, and axial (end-float) misalignment. Sier-Bath couplings make use of a unique gear tooth geometry produced particularly to resolve concerns with shaft misalignment and accommodate from 1/2° to 1-1/2° per gear mesh or flex plane. The hub teeth are entirely crowned to supply for any larger get in touch with location and reduced stresses beneath misaligned conditions. The crowned tooth design also eliminates almost all of the finish loading that occurs on straight gear teeth below misalignment.