Equipment Bins For Rotary Cutter’s, Shredders, and Choppers
RC 30 Collection Gearbox, 40hp Rated, one-three/eight” SB enter, 1-1/two” X twelve Spline Output. one:one.47 Ratio Change your damaged rotary cutter gearbox with this substitution device. Why rebuild when you can substitute at such a low price tag? These gearboxes have been employed by Worksaver, HawkLine, Global, WAC, Huge Bee, LMC, King Kutter, Midwest, Servis, Bush Hog, some Howse and numerous a lot more. Be aware: Real Gearbox could have a rounded housing or sq. as proven, based on existing availability, all inside elements are interchangeable and specs for equally containers are identical! This gearbox characteristics a one:1.forty seven Pace Up gear ratio for use on 5′ and greater diameter rotary cutters. Sector normal one-3/8″ sleek diameter input shaft with 1/two” shear bolt hole and retaining ring groove and one.57″ diameter twelve tapered spline output shaft let fitment to most gentle, normal and medium obligation rotary cutters. Every single gearbox functions high velocity ball bearing units and heat treated gears and shafts to make sure extended existence. Four bolt mounting matches industry requirements. Each and every gearbox consists of blade provider mounting nut and cotter pin. Gearboxes are shipped dry and call for sixteen ounces of 80-90W gearlube or equal. Disclaimer: Any and all Authentic Products Manufacturer’s (OEM) tradenames, logos, drawings, hues, descriptive data and portion figures are utilized for elements identification purposes only, and DN Tools, LLC (DN) is in no way implying that any particular elements are OEM areas. Even more, any use of the OEM’s tradenames, logos, drawings or part quantities by DN is developed only to aid DN’s buyers, in getting the proper DN portion or ingredient which will replace the OEM’s part.
rotary cutter gearbox
Gearboxes operate to administer a transfer of velocity and torque by means of their inner equipment rotation, assisting the all round functionality of your rotary cutter. This RW-710-6S gearbox operates at 75-ninety HP. The housing is made from sturdy ductile iron and the input shaft steps one-three/8 in., with 6 splines. It has a gear ratio measuring one:1.46, and is developed for use with five ft., six ft., and seven ft. rotary cutters. Much more dimension and a lot more HP manner remember to get in touch with us for specifics.