Planetary gearbox installation method

In the family of reducers, planetary reducers are trusted in servo, stepping, DC and other transmission systems because of their small size, high transmission efficiency, wide deceleration vary and high precision. Its role is to reduce the speed increase torque and reduce the load/motor instant of inertia ratio beneath the premise of ensuring precision transmission. Previously few years, some users possess suffered from unnecessary harm when the reducer is broken because of human elements such as for example illegal installation. Therefore, to be able to better help the users to utilize the reducer, I will introduce you at length how to properly install the planetary reducer.
Proper installation, make use of and maintenance of the reducer is a significant part of ensuring the normal procedure of mechanical equipment. As a result, when setting up the planetary reducer, make certain to carefully assemble and use it in rigorous accordance with the next installation and use.
First step
Before installation, confirm if the motor and reducer are intact, and strictly check if the dimensions of the parts linked to the reducer are matched. Listed below are the dimensions and matching tolerances of the positioning boss, input shaft and reducer groove of the engine.
Second step
Unscrew the screw on the outer side of the flange of the reducer flange, Sprial Gear box change the clamping ring of the PCS program so that the medial side holes are aligned with the dirt holes, and place the hexagon socket into the hexagon. After that, remove the motor shaft key.
third step
Connect the electric motor to the gearbox naturally. When connecting, it should be ensured that the result shaft of the reducer is concentric with the insight shaft of the electric motor, and the outer flanges of both are parallel. As the center is inconsistent, it’ll cause the electric motor shaft to break or the reducer gear to wear.
In addition, it is strictly forbidden going to with a hammer or the like during installation to prevent harm to the bearing or gear because of excessive axial force or radial force. Be sure to tighten the mounting bolts before tightening the tightening bolts. Before installation, clean the anti-rust oil of the motor insight shaft, positioning boss and reducer reference to gasoline or zinc-sodium drinking water. Its purpose is to guarantee the tightness of the connection and the versatility of operation, and to prevent unnecessary wear.
Before connecting the motor to the reducer, the motor shaft keyway should be perpendicular to the tightening bolt. To ensure uniform pressure, first screw the mounting bolts at any diagonal placement, but usually do not tighten them. Then screw on the mounting bolts at the other two diagonal positions and finally tighten the four mounting bolts one at a time. Finally, tighten the tightening bolts. All tightening bolts should be fixed and inspected using the torque wrenches according to the indicated set torque data.
The correct installation between your reducer and the mechanical equipment is similar to the correct installation between your reducer and the drive motor. The main element is to make sure that the result shaft of the reducer is certainly concentric with the shaft of the powered part.



Professional production Roots Vacuum Pumps, rotary vane pump, rotary piston pump, liquid ring vacuum pump, Oil-free Air Compressor, Screw Compressor, Scroll Compressor Manufacturer and Supplier.