CZPT Pump for CZPT CZPT Blowing Extrusion CZPT
Benifits of the metering pump melt gear pump
1. Stabilizing the output pressure—the pressure on extruder can be reduced by 30%-fifty% after using melt pumps.
two. improving the product quality
three. increasing the extrusion output—reducing pressure on screw and chaning the building pressure from “screw to die” to “melt pump to die”, so the screw can extrude the products with high efficiency. Mean while the back-pressure on the extruder can be adjusted, reducing the melt residence in screw cylinder, stabilizing the plasticizing process and improving the product’s quality and quantity.
four. prolonging the working life—the pressure of extruder screw can be lowered after using the melt pumps, so screw wear can be reduced consumable
The melt gear pump we produce
Technica information
1.Rotate speed: ≤60rpm(Adjustable)
two.Temperature: 400°C (max.)
three.Max.Outlet pressure: 350Bar
4.Max.CZPTential pressure: 275Bar
five.Heating method: CZPT Steel Cartridge Heater
6.Fastening parts: 12.9 high-strength screws
seven.Voltage: 380V(Others are optional)
eight.Frequency: 50Hz(Others are optional)
CZPT parameter
Variety | Volume (cc/r) |
Max rotary Speed (r/min) |
Outlet stress (MPa) |
Inlet force (MPa) |
Stream rate L/h | Temperature | ||
Reduced viscosity one-1000Pa·s |
Substantial viscosity one thousand~8000Pa·s | CZPT-higher Viscosity ≥8000Pa·s |
||||||
GM-ME-five | five. | a hundred | ≤35 | ~30 | ≤20 | ≤12 | ≤8 | ≤350ºC |
GM-ME-seven.5 | seven.five | a hundred | ≤35 | ~30 | ≤20 | ≤18 | ≤10 | |
GM-ME-10 | 10 | one hundred | ≤35 | ~thirty | ≤20 | ≤25 | ≤15 | |
GM-ME-twenty | twenty | 90 | ≤35 | ~30 | ≤80 | ≤40 | ≤24 | |
GM-ME-31.5 | 31.5 | ninety | ≤35 | ~thirty | ≤150 | ≤80 | ≤42 | |
GM-ME-50 | 50 | eighty | ≤35 | ~30 | ≤220 | ≤120 | ≤70 | |
GM-ME-75 | 75 | eighty | ≤35 | ~thirty | ≤280 | ≤180 | ≤90 | |
GM-ME-a hundred | a hundred | eighty | ≤35 | ~thirty | ≤350 | ≤230 | ≤120 | |
GM-ME-one hundred sixty | one hundred sixty | 80 | ≤35 | ~30 | ≤550 | ≤350 | ≤175 | |
GM-ME-200 | 200 | 80 | ≤35 | ~thirty | ≤700 | ≤450 | ≤250 | |
GM-ME-250 | 250 | eighty | ≤35 | ~30 | ≤800 | ≤600 | ≤300 | |
GM-ME-355 | 355 | 80 | ≤35 | ~thirty | ≤1000 | ≤750 | ≤350 | |
GM-ME-five hundred | 500 | sixty | ≤35 | ~thirty | ≤1500 | ≤1000 | ≤500 | |
GM-ME-750 | 750 | 60 | ≤35 | ~thirty | ≤1850 | ≤1500 | ≤750 | |
GM-ME-1000 | one thousand | sixty | ≤35 | ~thirty | ≤3000 | ≤2000 | ≤1000 | |
GM-ME-1600 | 1600 | 50 | ≤35 | ~30 | ≤4000 | ≤3000 | ≤1500 | |
GM-ME-2500 | 2500 | fifty | ≤35 | ~30 | ≤6000 | ≤4500 | ≤2200 | |
GM-ME-3150 | 3150 | fifty | ≤35 | ~thirty | ≤7000 | ≤5200 | ≤2600 | |
GM-ME-4000 | 4000 | 40 | ≤35 | ~thirty | ≤8000 | ≤6000 | ≤3000 | |
Remark:the melt gear pump flow is linked with the function speed, material viscosity, strain, So the product choice remember to request for us. |
Software fields
CZPTmer CZPT(film, pipe, plate, sheet, granulation )
High Temperature or Large Viscosity CZPT (Laptop, PMMA, Ab muscles, HIPS, PET, PVB, PS, PP, PA, PE, PVA)
CZPT Fiber CZPT (polyester for cotton-fiber, polypropylene )
Other CZPTmer CZPT CZPT (rubber, asphalt, paint, adhesives, coatings, lubricants)
CZPT equipment pump applied for film blowing machine