Materials Handling Power UNIT

Materials Handling Electrical power UNIT one
Common Description
This energy unit is developed for that fork lift marketplace, consisting of remarkably productive gear pump, DC motor, guide increase and reduce valve, tank, ect. The up and down motion are controlled from the lever in the guide release valve, that’s outfitted with an electrical switch to activate the motor. The lowing speed is managed by the strain compensated movement handle valve.
Special Notes
one. The duty of this electrical power unit is S3, i.e. thirty seconds on and 270 senconds off.
2. Clean the many hydraulic parts concerned just before installation of the electrical power unit.
3. Viscosity on the hydraulic oil shoud be 15~46 cst, which really should also be clean and free of charge of impurities, N46 hydraulic oil is encouraged .
4. Oil modifying is required just after the original a hundred operation hours, afterwards the moment each and every 3000 hrs.
5. The energy unit shown is created to be mounted horizontally.

Materials Dealing with Electrical power UNIT 2
Basic Description
This power unit functions power up gravity down circuit. Activate the start off solenoid to begin the motor to lift the machine. The lowing motion is activated from the solenoid valve with all the decreasing velocity managed by the stress compensated movement handle valve. Solutions of this series could be widely utilized in the field of logistic gadgets for example fork lift, mini lift table, and so forth.
Special Notes
one. The duty of this energy unit is S3,i.e.,30 seconds on and 270 senconds off.
2. Clean each of the hydraulic components concerned prior to mounting the energy unit.
3. Viscosity with the hydraulic oil shoud be 15~46 cst,which ought to also be clean and totally free of impurities, N46 hydraulic oil is advisable .
4. Oil modifying is required immediately after the preliminary a hundred operation hrs,afterwards when each 3000 hrs.
five. The energy unit must be mounted horizontally.