Specifications
1,polymer melt gear pump
2, fit for huge ability output
three, suit for quite high or lower viscosity polymer
Big flow price polymer soften equipment pump for reactor as discharge pump
GM-LK series of polymer melt gear pump is designed with a large entrance , suitable for the high temperature and high viscosity polymer melt conveying reaction, such as resin, chemical fiber industry, generally installed on the lower part of the reaction kettle, used as discharge pump.This series of melt gear pump has good self-priming performance, can be used in the vacuum reaction condition, the polymer material conveying and pressurization.
This GM-LK sequence huge stream charge polymer melt gear pump utilized underneath the response kettle/reactor as a discharge pump, you can see the adhering to pictures
Main application fields:
For Processing:
PET PBT
PA6 PA66 PA12
LDPE LLDPE HDPE HMWPE
PP EVA PB
PS HIPS ABS SAN
PC PEK
PMMA POM TPU
Other high viscosity CZPTmers
Product show
The characteristic of this GM-G series polymer melt gear pump beneath the response kettle as discharge pump.
one)it can be used on high temperature (350ºC),high pressure(15MPa),high viscosity (40,000Pas)working condition.
2)The pressure flow pulsation is very small, and even can achieve linear output flow,easy to control
3)Good self-priming performance, can be used in the entrance with the operation condition of vacuum (.05 ~ 0.09 MPa)
four)Precise structure, high precision, long service life
CZPT data:
Viscosity: 500~40000Pas(five hundred,000~forty,000,000cP)
Suction side pressure : Vacuum(-.05~-.09MPa)~10MPa
Discharge side pressure: 0~15MPa
CZPTential pressure: 15MPa
Temperature: ≤350ºC
Heating method: Fully heating medium Jacketed
HT medium pressure: ≤1.6MPa
Pump variety and parameter
Type |
Quantity (cc/r) |
Max roate pace (r/min) |
Outlet force (MPa) |
Inlet pressure (MPa) |
Rate of flow m3/h | Temperature | ||
Low viscosity content one-1000Pa·s |
Higher viscosity material a thousand~8000Pa·s |
CZPT-high viscosity substance >=8000Pa·s |
||||||
GM-LK-100 | 100 | one hundred | ≤35 | Vacuum~five. | ≤0.51 | ≤0.36 | ≤0.21 | ≤350ºC |
GM-LK-160 | one hundred sixty | one hundred | ≤0.82 | ≤0.57 | ≤0.34 | |||
GM-LK-200 | two hundred | a hundred | ≤1. | ≤0.7 | ≤0.four | |||
GM-LK-250 | 250 | a hundred | ≤1.three | ≤0.nine | ≤0.5 | |||
GM-LK-355 | 315 | a hundred | ≤1.six | ≤1.1 | ≤0.seven | |||
GM-LK-500 | 500 | 100 | ≤2.6 | ≤1.eight | ≤1.1 | |||
GM-LK-750 | 750 | eighty | ≤3.one | ≤2.1 | ≤1.3 | |||
GM-LK-1250 | one thousand | eighty | ≤4.1 | ≤2.nine | ≤1.seven | |||
GM-LK-2000 | 2500 | 80 | ≤10 | ≤7 | ≤4 | |||
GM-LK-3150 | 3150 | 80 | ≤13 | ≤9 | ≤5 | |||
GM-LK-4500 | 4500 | 60 | ≤14 | ≤10 | ≤6 | |||
GM-LK-6300 | 6300 | sixty | ≤19 | ≤13 | ≤8 | |||
GM-LK-8000 | 8000 | 60 | ≤24 | ≤17 | ≤10 | |||
GM-LK-12000 | 12000 | 50 | ≤31 | ≤21 | ≤13 | |||
GM-LK-25000 | 25000 | fifty | ≤64 | ≤45 | ≤27 | |||
Remark:the melt gear pump flow is linked with the operate pace, material viscosity, pressure, So the model selection make sure you ask for us. |
CZPT structure
1)the melt dynamic seal and packing seal
two)Single/double side machanical seal
three)With cooling melt dynamic seal
4)High temperature resistant packing seal
Installation way: GM-LK series melt gear pump generaaly is installed under the reaction kettle, it is used as the material discharge pump, usually arranged horizontally.
CZPT mode:motor + reducer + universal coupling
Commissioning
We provide the operation manual for customers to gudie to install the screen changer, and at the requirement of user, salers should send technician to install and commissioning the die at site of Buyers, expenses of the trip should be borne by Buyers.
Following-sales service
12 months with proper operation by user, all the spare parts shall be replaced free of charge under guarantee period, fee for transportation and packing will be borne by users.