DUMP TRAILER Electrical power UNIT

DUMP TRAILER Energy UNIT- SINGLE ACTING
Basic Description
This energy unit features a electrical power up gravity down circuit. Start the motor to lengthen the cylinder and activate the solenoid valve to retract the circuit. Manual override to solenoid valve may be supplied if needed. Also a stress compen sated flow management can be extra towards the circuit to manage the descent speed from the cylinder.
Remark: Please seek the advice of our sales engineer to the various pump displacement, motor electrical power or tank capability.
Particular Notes
1. This energy unit is of S3 duty cycle, i.e., non-continuous operation, 30 seconds on and 270 seconds off.
2. Clean each of the hydraulic parts concerned prior to installation of the power unit.
three. Viscosity in the hydraulic oil shoud be 15~46 cst,which really should also be clean and free of impurities.N46 hydraulic oil is advised.
four. The power unit should be mounted horizontally.
5. Check the oil degree inside the tank right after the initial operating on the electrical power unit.
6. Oil transforming is needed just after the initial 100 operation hours, afterwards the moment just about every 3000 hours.

DUMP TRAILER Electrical power UNIT-DOUBLE ACTING
Standard Description
This power unit includes a energy up power down circuit with load holding on both A & B ports. A stress compensatred flow manage is often added to circuit to control the decent speed in the cylinder.
Distinctive Notes
one. This energy unit is of S3 duty cycle, i.e., non-continuous operation, 30 seconds on and 270 seconds off.
2. Clean all the hydraulic elements concerned ahead of installation of the power unit.
3. Viscosity of the hydraulic oil shoud be 15~46 cst, which should really also be clean and free of impurities. N46 hydraulic oil is encouraged.
four. The power unit needs to be mounted horizontally.
five. Check the oil degree within the tank just after the initial working in the electrical power unit.
six. Oil modifying is required just after the preliminary 100 operation hrs, afterwards as soon as each and every 3000 hours.