HI-PWR-SHK Style Roller Chains

High-end type of the large power series
The DID HI-PWR-SHK roller chains have thicker hyperlink plates than HI-PWR-S roller chains, and therefore are the highest in tensile power and allowable load amongst basic application chains, as a result remaining appropriate for minimal velocity hefty duty transmission.
Advisable utilizes
?The HI-PWR-SHK roller chains are 25 % larger in tensile strength and 50 percent larger in optimum allowable load compared to the typical roller chains, but considering that their fat is heavier, driving effectiveness declines at large pace. So, they may be appropriate for hefty duty at low pace applications.

Multilevel parking machines, pipe benders, development machines, etc.
Variety of chains
Choose a right HI-PWR-SHK style chain based upon “Low-speed selection”
HI-PWR-SHK series is accessible in simplex.
Sprockets
Common sprockets for multiplex chains are unable to be applied.
Connecting links and offset back links
The best feature from the HI-PWR-SHK roller chains is higher highest allowable load. Thus, interference-fitted connecting links (H connecting links) with small power degradation are employed.
The connecting plate and the connecting pins are connected with spring pins. The tensile power of an H connecting link is equivalent to that in the chain, however the allowable load is somewhat decrease than that of your chain.
HI-PWR-S style roller chains don’t have any offset website link. Use an even variety of backlinks.
Under no circumstances make the holes from the connecting plate more substantial and never ever make the pins thinner to facilitate the get the job done for fitting the pins to the connecting plate, considering the fact that otherwise the fatigue power will probably be lowered.