The EP Greenhouse gear reducer is a compact and lightweight reduction geared motor with a built-in limit switch system that is suitable for assembly of a locally available electric electric motor. The gear motor is utilized in manually-controlled or climate-controlled ventilation and display screen systems in greenhouses. The quick and easy-to-install EP reducer is usually rainproof and windproof. The gear reducer includes a high protection class (IP65) and can be utilized in an ambient temperature of 0-60 °C.
The low-noise reducer for Greenhouse has a gearwheel transmission and a worm wheel transmission, which are integrated in an aluminum precision housing. The self-braking worm wheel transmission ensures that the drive shaft is certainly locked when the reduction gear motor isn’t running. The fully sealed reduction gear reducer comes with an growth chamber with a diaphragm to keep carefully the gear oil at a low pressure under all conditions, even at high temps. Thanks to the use of an expansion chamber, the gear driver can be installed in any placement. There are no restrictions, because there is no dependence on a bleed plug. The sealed reduction reducer keeps the gear oil of the gearbox in optimal condition for its entire operating lifetime. The gear driver is suitable for discontinuous use, working class s3-30%, with a maximum activation period of 25 minutes.
The Gear box reduction gear motor has an FT85 motor assembly flange, on to which a suitable IEC standard motor can certainly be installed (EN 50347).
The Gear box has a rotating limit switch system with operating switches and circuit breakers (NC contacts) for turning off by the end positions. The limit change system is installed in an integrated chamber and can be enclosed by an impact-resistant plastic material cover. The limit switch system is obtainable and simple to adjust. The limit switch system’s maximum switching range is 40 or 64 revolutions of the drive shaft. The cabling is linked in spring-clip connections. The gearbox comes with an IP68 M16 x 1.5 cable gland (5-9 mm cable) for the cable feed-through.
The geared motor for greenhouse comes with 16 teeth 5/8”x3/8” sprockets, keys and fasteners. The accompanying chain couplings and assembly plates can be found as accessories.
Maximum drive torque of 150 Nm or 450 Nm.
Rotational speeds of 3 or 5 rpm for a mains frequency of 50 Hz or 3.6 or 6 rpm for a mains frequency of 60 Hz in case of application of 4-pole electric motor.
Protection class IP65.
May be used in ambient temps of 0-60°C.
Suitable for discontinuous use, operating class s3-30%, maximum activation time 25 mins.
Equipped as regular with 16-tooth galvanised chain coupling 5/8″x3/8″.
FT85 motor assembly flange for installing IEC standard motor (EN 50347).
Maximum switching selection of limit switch program 40 or 64 revolutions of the drive shaft.
IP68 M16x1.5 cable gland for cable feedthrough (5-9 mm cable).