The agricultural gearbox is the main mechanical element of the kinematic chain of agricultural machines. It is normally powered by the tractor power take-off via the PTO shaft and the gearbox drives. The working torque may also be transmitted to the gearbox by hydraulic motors or belt pulleys, in addition to chain gears.
Agricultural gearboxes will have a single input shaft and at least a single output shaft. If these shafts are positioned at 90° to one another, the gearbox is an ORTHOGONAL ANGLE gearbox or even more generally called a right-angle gearbox.
rotary tiller gearbox is adopted middle gear transmission system, mounted with the tractor of 12-80HP. Tractor wheel tracks are totally protected after tillage as the functioning width is much wider. The product quality is dependable and the functionality is well. So it can be utilized on dried out and paddy field. It could reduce the time, laboring, and price, etc. during operation
Increasers and Reducers
When the gearboxes have the two gears with different amounts of teeth.
The gearbox is a reducer when the driving gear, i.electronic. the main one with the insight shaft, gets the fewer amount of teeth (pinion), therefore the output shaft gearbox for agricultural machinery rotates slower compared to the input shaft.
It is called an increaser when the input shaft is mounted on the gear with the larger amount of teeth (crown), hence the result shaft rotates faster compared to the input shaft.
Right-angle gearboxes, distributors or rotational reverse gearboxes
When the gearboxes have gears with the same number of tooth.
The gearbox is known as right-angle when it only has two shafts (input and output),
whereas it really is called a distributor whenever there are at least two output shafts.
It really is called a rotational reverse gearbox and parallel offset in the variations with parallel shafts with two gearboxes.
in addition to the main pair of gears and relevant shafts, the gearboxes may also have various other gears with a different number of teeth. The apparatus shift of the primary pair of gears with the secondary ones enables different speeds. The manual change of the secondary equipment set with gears with different amount of teeth allows adjustments to the result rotation speed.
CMR GROUP will be able to design and produce also agricultural machinery applications.