gearbox for agricultural machinery

gearbox for agricultural machinery agricultural Gearbox
The agricultural gearbox is the main mechanical component of the kinematic chain of agricultural machines. It is normally driven by the tractor power take-off via the PTO shaft and the gearbox drives. The operating torque can also be transmitted to the gearbox by hydraulic motors or belt pulleys, furthermore to chain gears.
Agricultural gearboxes will have one input shaft and at least 1 output shaft. If these shafts sit at 90° to each other, the gearbox can be an ORTHOGONAL ANGLE gearbox or more frequently called a right-angle gearbox.

rotary tiller gearbox can be adopted middle equipment transmission system, mounted with the tractor of 12-80HP. Tractor wheel tracks are totally protected after tillage as the functioning width is much wider. The quality is reliable and the performance is well. So that it can be utilized on dried out and paddy field. It can reduce the time, laboring, and cost, etc. during operation

Increasers and Reducers
When the gearboxes have both gears with different amounts of teeth.
The gearbox is a reducer when the driving gear, i.electronic. the one with the input shaft, gets the fewer amount of teeth (pinion), therefore the result shaft rotates slower compared to the input shaft.
It is called an increaser when the insight shaft is mounted on the gear with the larger quantity of teeth (crown), therefore the result shaft rotates faster compared to the input shaft.
Right-angle gearboxes, distributors or rotational reverse gearboxes
When the gearboxes have gears with the same number of teeth.
The gearbox is known as right-angle when it only has two shafts (input and output),
whereas it really is called a distributor when there are at least two output shafts.
It is called a rotational invert gearbox and parallel offset in the variations with parallel shafts with two gearboxes.

Speed change
in addition to the primary pair of gears and relevant shafts, the gearboxes could also have additional gears with a different quantity of teeth. The apparatus shift of the main pair of gears with the secondary types enables different speeds. The manual change of the secondary gear pair with gears with different amount of teeth allows adjustments to the output rotation speed.
CMR GROUP can design and produce also agricultural machinery applications.

TAGs:

Mail: [email protected]

Professional production Roots Vacuum Pumps, rotary vane pump, rotary piston pump, liquid ring vacuum pump, Oil-free Air Compressor, Screw Compressor, Scroll Compressor Manufacturer and Supplier.