Descripción del producto
Working principle
The vacuum in dry screw pumps is created through 2 parallel-arranged screw rotors that rotate in opposite directions. These rotors trap the gas coming in through the inlet and deliver it to the gas discharge or pressure side. As the gas is getting compressed, there is no contact between the rotors. This does away with any need for the compression chamber to have any operating fluids or lubrication.
The lubricant used to lubricate the gears and shaft seal is sealed in the gearbox by the shaft seal. The pump can be cooled either directly by circulating cooling water or by a cooling unit with fan and radiator.
The dry screw vacuum pump adopts a special rotor pitch design, compared with the ordinary rotor pitch design, reduce the energy consumption by about 30%, the temperature rise of the exhaust end is reduced by about 100 ºC, the reliability and stability of the operation of the product is greatly improved, can be suitable for any working conditions of vacuum.
The dry screw pumps can be widely used in solvent recovery, vacuum drying, concentration, crystallization, distillation and other processes in the chemical and pharmaceutical industries, vacuum extrusion and molding in the plastic and rubber industries, vacuum degassing in the metallurgical industry; vacuum degassing and drying in the solar energy, microelectronics, lithium battery and other industries.
Pump body and end caps: high-strength cast iron.
Pump body and end caps: high strength cast iron.
Screw rotor: ductile cast iron.
Anti-corrosion coating: corrosion-resistant Hastelloy.
Synchronous gears: alloy steel.
Radial lip seal: imported PTFE mixture or
high-temperature resistant fluorine rubber;
Seal bushings: stainless steel surface covered with ceramic.
Flow chart
Main features
1. The screw rotor is designed with variable pitch structure, the ultimate vacuum can reach below 1Pa, which can meet all kinds of vacuum processing from atmosphere to high vacuum.
2. Oil free – Adapt to various special working conditions for reliable use.
3. It can operate reliably in the pressure range from atmosphere to several Pa.
4. No friction between moving parts, simple structure, lower operation and maintenance cost.
5. Nitrogen seal and composite seal design is optional, which has the benefit of good reliability, low cost of use, simple maintenance.
6. The rotor is dynamically balanced at high speed and the motor is connected by flange, with high concentricity, low vibration and low noise.
7. Hastelloy anti-corrosion coating is optional for rotor surface, condensable material is not easy to condense in the pump cavity, better corrosion resistance.
8. Compared with oil seal pump, liquid ring pump, there is no waste gas, no waste liquid, no waste oil emission, energy saving and environmental friendly.
It can be used alone or with Roots vacuum pump, air-cooled Roots vacuum pump, molecular vacuum pump, etc. to obtain an oil-free high vacuum system.
The benefit of dry screw vacuum pump compared to liquid ring vacuum pump:
-Shorten the process cycle and improve production efficiency
-Reduce water consumption
-Save energy
-Improve product quality
-Can recover solvent by reducing the drying time of products
-Reduce the cost of wastewater and waste gas treatment
A CASE in a pharmaceutical factory
Process introduction:The penicillin sodium salt solution is fed into the crystallization tank through vacuum. By steam heating, agitator stirring, and adding butanol, the water and butanol in the penicillin solution are pumped into the condenser and condensed into the liquid collecting tank, which can be reused.
Process requirements:
1. The volume of crystallization tank is 7.5m3, and about 4.5m3 penicillin solution is added in the process.
2. Before entering the crystallization tank, the water content of penicillin solution is about 20%, and after crystallization, the water content is required to be about 1%.
3. Vacuum feeding for 2h, then adding butanol for 30min, and then starting to crystallize. The process requires low temperature and fast speed, and the lower the temperature, the better the quality of penicillin. The shorter the reaction time, the better.
4. Vacuum degree requirements: the vacuum degree shall be kept above -0.097MPa. High vacuum degree can reduce the reaction temperature and shorten the reaction time.
The previous vacuum system was 2BE1252+air ejector, which is now transformed into a dry screw vacuum pump. The comparison table of test data is as follows:
| vacuum system | 2BE1252+ejector | DVP 1600 screw pump |
| Feeding time (h) | 2 | 1.5 |
| Liquid temperature at the beginning of crystallization (ºC) | 31.5 | 16.6 |
| Crystallization time (h) | 6 | 4.5 |
| Time from crystallization to liquid coming out (min) | 30 | 15 |
| Crystal quality | average | good |
| Power consumption (KW) | 45 | 37 |
| Water consumption (m3) | 26.4 | 0.72 |
Economic benefit analysis:
| Cost saving(USD) | Remark | |
| Water consumption and treatment | 130 | Water cost: $0.65/m3, water treatment: 30/m3 |
| Power | 15 | $0.15/Kwh |
| Labor, production efficiency | 43 | Reduced from 6 hour to 4.5 hour |
| Sum up | 188 |
Please contact us for a detailed report of economic benefit analysis for your applications!
Configuration
Standard configuration:
Machine base, pump head, coupling, motor, driving screen, air inlet connector, check valve, vacuum gauge, manual filling valve exhaust port muffler.
Optional accessories:
Inlet filter, inlet condenser, solvent flushing device, nitrogen purging device, nitrogen sealing device, exhaust port condenser, solenoid filling valve, cooling water flow switch, temperature sensor, pressure transmitter.
Applications
| Leak Detection | Metallurgy | Industrial furnace | Lithium Battery |
| Chemical, pharmaceutical | Wind tunnel test | Power Industry | Vacuum coating |
| Microelectronics industry | Drying Process | Packaging and Printing | Solar Energy |
| Exhaust gas recovery |
Parámetros del producto
Technical data of Constant pitch Dry screw vacuum pump
| Spec. Modelo |
Nominal pumping speed(50Hz) | Ultimate pressure | Nominal motor rating (50Hz) | Nominal motor speed (50Hz) | Noise level Lp | Maximum cooling water required |
Suction Connection size | Discharge Connection size | Weight (Without Motor) |
| m³/h | Pa | kw | rpm | dB(A) | L/min | mm | mm | Kg | |
| DSP-140 | 143 | 5 | 4 | 2900 | 82 | 10 | 50 | 40 | 240 |
| DSP-280 | 278 | 5 | 7.5 | 2900 | 83 | 20 | 50 | 40 | 350 |
| DSP-540 | 521 | 5 | 15 | 2900 | 83 | 30 | 65 | 50 | 550 |
| DSP-650 | 617 | 5 | 18.5 | 2900 | 84 | 45 | 65 | 50 | 630 |
| DSP-720 | 763 | 5 | 22 | 2900 | 85 | 55 | 80 | 80 | 780 |
| DSP-1000 | 912 | 5 | 30 | 2900 | 86 | 70 | 100 | 80 | 880 |
Technical data of Variable pitch Dry screw vacuum pump
| Spec. Modelo |
Nominal pumping speed(50Hz) | Ultimate pressure | Nominal motor rating (50Hz) | Nominal motor speed (50Hz) | Noise level Lp | Maximum cooling water required |
Suction Connection size | Discharge Connection size | Weight (Without Motor) |
| m³/h | Pa | kw | rpm | dB(A) | L/min | mm | mm | Kg | |
| DVP-180 | 181 | 2 | 4 | 2900 | 82 | 8 | 50 | 40 | 280 |
| DVP-360 | 354 | 2 | 7.5 | 2900 | 83 | 10 | 50 | 40 | 400 |
| DVP-540 | 535 | 2 | 11 | 2900 | 83 | 10 | 50 | 40 | 500 |
| DVP-650 | 645 | 1 | 15 | 2900 | 84 | 20 | 65 | 50 | 600 |
| DVP-800 | 780 | 1 | 22 | 2900 | 86 | 30 | 100 | 80 | 800 |
| DVP-1600 | 1450 | 1 | 37 | 2900 | 86 | 40 | 125 | 100 | 1200 |
Note: The cooling water volume of the dry screw vacuum pump provided in the table is the amount under 20ºC room temperature water. When the dry screw vacuum pump uses cooling device, the cooling water will be increased, the difference of inlet and outlet water temperature is generally controlled below 7ºC is appropriate.
Dimensión
PREGUNTAS FRECUENTES
Q: What information should I offer for an inquiry?
A: You can inquire based on the model directly, but it is always recommended that you contact us so that we can help you to check if the pump is the most appropriate for your application.
Q: Can you make a customized vacuum pump?
A: Yes, we can do some special designs to meet customer applications. Such as customized sealing systems, speical surface treatment can be applied for roots vacuum pump and screw vacuum pump. Please contact us if you have special requirements.
Q: I have problems with our vacuum pumps or vacuum systems, can you offer some help?
A: We have application and design engineers with more than 30 years of experience in vacuum applications in different industries and help a lot of customers resolve their problems, such as leakage issues, energy-saving solutions, more environment-friendly vacuum systems, etc. Please contact us and we’ll be very happy if we can offer any help to your vacuum system.
Q: Can you design and make customized vacuum systems?
A: Yes, we are good for this.
Q: What is your MOQ?
A: 1 piece or 1 set.
Q: How about your delivery time?
A: 5-10 working days for the standard vacuum pump if the quantity is below 20 pieces, 20-30 working days for the conventional vacuum system with less than 5 sets. For more quantity or special requirements, please contact us to check the lead time.
Q: What are your payment terms?
A: By T/T, 50% advance payment/deposit and 50% paid before shipment.
Q: How about the warranty?
A: We offer 1-year warranty (except for the wearing parts).
Q: How about the service?
A: We offer remote video technical support. We can send the service engineer to the site for some special requirements.
| Servicio postventa: | Online Video Instruction |
|---|---|
| Garantía: | 1 año |
| Nominal Pumping Speed(50Hz): | 912 M3/H |
| Ultimate Pressure: | 5PA |
| Nominal Motor Rating(50Hz): | 30 Kw |
| Nominal Motor Speed(50Hz): | 2900 Rpm |
¿Pueden utilizarse las bombas de vacío en el sector aeroespacial?
Las bombas de vacío tienen diversas aplicaciones en el sector aeroespacial. He aquí una explicación detallada:
Las bombas de vacío desempeñan un papel crucial en varias áreas de la industria aeroespacial, ya que sirven de apoyo a diversos procesos y sistemas. Algunas de las aplicaciones clave de las bombas de vacío en el sector aeroespacial son:
1. Cámaras de simulación espacial: Las bombas de vacío se utilizan en cámaras de simulación espacial para reproducir las condiciones de baja presión que se experimentan en el espacio exterior. Estas cámaras se utilizan para probar y validar el rendimiento y la funcionalidad de los componentes y sistemas aeroespaciales en condiciones espaciales simuladas. Las bombas de vacío crean y mantienen el entorno de vacío necesario dentro de estas cámaras, lo que permite a ingenieros y científicos evaluar el comportamiento y la respuesta de los equipos aeroespaciales en condiciones similares a las del espacio.
2. Gestión del propulsante: En los sistemas de propulsión espacial, las bombas de vacío se emplean para la gestión de propulsantes. Ayudan en la transferencia, circulación y presurización de propulsantes, como combustibles líquidos para cohetes o fluidos criogénicos, tanto en vehículos de lanzamiento como en naves espaciales. Las bombas de vacío ayudan a crear los diferenciales de presión necesarios para el flujo y el control de los propulsores, garantizando un funcionamiento eficaz y fiable de los sistemas de propulsión.
3. Sistemas de control ambiental: Las bombas de vacío se utilizan en los sistemas de control ambiental de aeronaves y naves espaciales. Estos sistemas son responsables de mantener las condiciones atmosféricas deseadas, incluyendo la temperatura, la humedad y la presión de la cabina, para garantizar la comodidad, la seguridad y el bienestar de los miembros de la tripulación y los pasajeros. Las bombas de vacío se utilizan para regular y controlar la presión de la cabina, facilitando la circulación de aire fresco y manteniendo la calidad del aire deseada dentro de la aeronave o nave espacial.
4. Tecnología de satélites: Las bombas de vacío tienen numerosas aplicaciones en la tecnología de satélites. Se utilizan en la fabricación y comprobación de componentes de satélites, como sensores, detectores y dispositivos electrónicos. Las bombas de vacío ayudan a crear las condiciones de vacío necesarias para la deposición de películas finas, el tratamiento de superficies y los procesos de prueba, garantizando el rendimiento y la fiabilidad de los equipos de los satélites. Además, las bombas de vacío se emplean en los sistemas de propulsión de satélites para gestionar los propulsores y proporcionar empuje para las maniobras orbitales.
5. Aviónica e instrumentación: Las bombas de vacío intervienen en la producción y ensayo de sistemas de aviónica e instrumentación utilizados en aplicaciones aeroespaciales. Facilitan procesos como la deposición de películas finas, la encapsulación al vacío y el secado al vacío, garantizando la integridad y funcionalidad de los componentes y circuitos electrónicos. Las bombas de vacío también se utilizan en pruebas de fugas al vacío, donde ayudan a crear un entorno de vacío para detectar y localizar fugas en sistemas y componentes aeroespaciales.
6. Pruebas a gran altitud: Las bombas de vacío se utilizan en instalaciones de ensayo a gran altitud para simular las condiciones de baja presión que se dan a gran altitud. Estas instalaciones de ensayo se emplean para evaluar el rendimiento y la funcionalidad de equipos aeroespaciales, como motores, materiales y estructuras, en condiciones simuladas de gran altitud. Las bombas de vacío crean y controlan el entorno de baja presión necesario, lo que permite a los ingenieros e investigadores evaluar el comportamiento y la respuesta de los sistemas aeroespaciales en escenarios de gran altitud.
7. Pruebas de motores de cohetes: Las bombas de vacío son cruciales en las instalaciones de pruebas de motores de cohetes. Se utilizan para evacuar y mantener las condiciones de vacío en las cámaras o toberas de prueba de motores durante las pruebas de motores de cohetes. Al crear un entorno de vacío, estas bombas simulan las condiciones que experimentan los motores de cohetes en el vacío del espacio, lo que permite realizar pruebas y evaluaciones precisas del rendimiento, los niveles de empuje y la eficiencia de los motores.
Es importante tener en cuenta que las aplicaciones aeroespaciales suelen requerir bombas de vacío especializadas capaces de cumplir requisitos estrictos, como alta fiabilidad, baja desgasificación, compatibilidad con propulsores o fluidos criogénicos y resistencia a temperaturas y presiones extremas.
En resumen, las bombas de vacío se utilizan ampliamente en el sector aeroespacial para una amplia gama de aplicaciones, como cámaras de simulación espacial, gestión de propulsantes, sistemas de control medioambiental, tecnología de satélites, aviónica e instrumentación, pruebas a gran altitud y pruebas de motores de cohetes. Contribuyen al desarrollo, las pruebas y el funcionamiento de los equipos aeroespaciales, garantizando un rendimiento, una fiabilidad y una seguridad óptimos.
Can Vacuum Pumps Be Used for Soil and Groundwater Remediation?
Vacuum pumps are indeed widely used for soil and groundwater remediation. Here’s a detailed explanation:
Soil and groundwater remediation refers to the process of removing contaminants from the soil and groundwater to restore environmental quality and protect human health. Vacuum pumps play a crucial role in various remediation techniques by facilitating the extraction and treatment of contaminated media. Some of the common applications of vacuum pumps in soil and groundwater remediation include:
1. Soil Vapor Extraction (SVE): Soil vapor extraction is a widely used remediation technique for volatile contaminants present in the subsurface. It involves the extraction of vapors from the soil by applying a vacuum to the subsurface through wells or trenches. Vacuum pumps create a pressure gradient that induces the movement of vapors towards the extraction points. The extracted vapors are then treated to remove or destroy the contaminants. Vacuum pumps play a vital role in SVE by maintaining the necessary negative pressure to enhance the volatilization and extraction of contaminants from the soil.
2. Dual-Phase Extraction (DPE): Dual-phase extraction is a remediation method used for the simultaneous extraction of both liquids (such as groundwater) and vapors (such as volatile organic compounds) from the subsurface. Vacuum pumps are utilized to create a vacuum in extraction wells or points, drawing out both the liquid and vapor phases. The extracted groundwater and vapors are then separated and treated accordingly. Vacuum pumps are essential in DPE systems for efficient and controlled extraction of both liquid and vapor-phase contaminants.
3. Groundwater Pumping and Treatment: Vacuum pumps are also employed in groundwater remediation through the process of pumping and treatment. They are used to extract contaminated groundwater from wells or recovery trenches. By creating a vacuum or negative pressure, vacuum pumps facilitate the flow of groundwater towards the extraction points. The extracted groundwater is then treated to remove or neutralize the contaminants before being discharged or re-injected into the ground. Vacuum pumps play a critical role in maintaining the required flow rates and hydraulic gradients for effective groundwater extraction and treatment.
4. Air Sparging: Air sparging is a remediation technique used to treat groundwater and soil contaminated with volatile organic compounds (VOCs). It involves the injection of air or oxygen into the subsurface to enhance the volatilization of contaminants. Vacuum pumps are utilized in air sparging systems to create a vacuum or negative pressure zone in wells or points surrounding the contaminated area. This induces the movement of air and oxygen through the soil, facilitating the release and volatilization of VOCs. Vacuum pumps are essential in air sparging by maintaining the necessary negative pressure gradient for effective contaminant removal.
5. Vacuum-Enhanced Recovery: Vacuum-enhanced recovery, also known as vacuum-enhanced extraction, is a remediation technique used to recover non-aqueous phase liquids (NAPLs) or dense non-aqueous phase liquids (DNAPLs) from the subsurface. Vacuum pumps are employed to create a vacuum or negative pressure gradient in recovery wells or trenches. This encourages the movement and extraction of NAPLs or DNAPLs towards the recovery points. Vacuum pumps facilitate the efficient recovery of these dense contaminants, which may not be easily recoverable using traditional pumping methods.
It’s important to note that different types of vacuum pumps, such as rotary vane pumps, liquid ring pumps, or air-cooled pumps, may be used in soil and groundwater remediation depending on the specific requirements of the remediation technique and the nature of the contaminants.
In summary, vacuum pumps play a vital role in various soil and groundwater remediation techniques, including soil vapor extraction, dual-phase extraction, groundwater pumping and treatment, air sparging, and vacuum-enhanced recovery. By creating and maintaining the necessary pressure differentials, vacuum pumps enable the efficient extraction, treatment, and removal of contaminants, contributing to the restoration of soil and groundwater quality.
Can Vacuum Pumps Be Used in Food Processing?
Yes, vacuum pumps are widely used in food processing for various applications. Here’s a detailed explanation:
Vacuum pumps play a crucial role in the food processing industry by enabling the creation and maintenance of vacuum or low-pressure environments. They offer several benefits in terms of food preservation, packaging, and processing. Here are some common applications of vacuum pumps in food processing:
1. Vacuum Packaging: Vacuum pumps are extensively used in vacuum packaging processes. Vacuum packaging involves removing air from the packaging container to create a vacuum-sealed environment. This process helps extend the shelf life of food products by inhibiting the growth of spoilage-causing microorganisms and reducing oxidation. Vacuum pumps are used to evacuate the air from the packaging, ensuring a tight seal and maintaining the quality and freshness of the food.
2. Freeze Drying: Vacuum pumps are essential in freeze drying or lyophilization processes used in food processing. Freeze drying involves removing moisture from food products while they are frozen, preserving their texture, flavor, and nutritional content. Vacuum pumps create a low-pressure environment that allows frozen water to directly sublimate from solid to vapor, resulting in the removal of moisture from the food without causing damage or loss of quality.
3. Vacuum Cooling: Vacuum pumps are utilized in vacuum cooling processes for rapid and efficient cooling of food products. Vacuum cooling involves placing the food in a vacuum chamber and reducing the pressure. This lowers the boiling point of water, facilitating the rapid evaporation of moisture and heat from the food, thereby cooling it quickly. Vacuum cooling helps maintain the freshness, texture, and quality of delicate food items such as fruits, vegetables, and bakery products.
4. Vacuum Concentration: Vacuum pumps are employed in vacuum concentration processes in the food industry. Vacuum concentration involves removing excess moisture from liquid food products to increase their solids content. By creating a vacuum, the boiling point of the liquid is reduced, allowing for gentle evaporation of water while preserving the desired flavors, nutrients, and viscosity of the product. Vacuum concentration is commonly used in the production of juices, sauces, and concentrates.
5. Vacuum Mixing and Deaeration: Vacuum pumps are used in mixing and deaeration processes in food processing. In the production of certain food products such as chocolates, confectioneries, and sauces, vacuum mixing is employed to remove air bubbles, achieve homogeneity, and improve product texture. Vacuum pumps aid in the removal of entrapped air and gases, resulting in smooth and uniform food products.
6. Vacuum Filtration: Vacuum pumps are utilized in food processing for vacuum filtration applications. Vacuum filtration involves separating solids from liquids or gases using a filter medium. Vacuum pumps create suction that draws the liquid or gas through the filter, leaving behind the solid particles. Vacuum filtration is commonly used in processes such as clarifying liquids, removing impurities, and separating solids from liquids in the production of beverages, oils, and dairy products.
7. Marinating and Brining: Vacuum pumps are employed in marinating and brining processes in the food industry. By applying a vacuum to the marinating or brining container, the pressure is reduced, allowing the marinade or brine to penetrate the food more efficiently. Vacuum marinating and brining help enhance flavor absorption, reduce marinating time, and improve the overall taste and texture of the food.
8. Controlled Atmosphere Packaging: Vacuum pumps are used in controlled atmosphere packaging (CAP) systems in the food industry. CAP involves modifying the gas composition within food packaging to extend the shelf life and maintain the quality of perishable products. Vacuum pumps aid in the removal of oxygen or other unwanted gases from the package, allowing the introduction of a desired gas mixture that preserves the food’s freshness and inhibits microbial growth.
These are just a few examples of how vacuum pumps are used in food processing. The ability to create and control vacuum or low-pressure environments is a valuable asset in preserving food quality, enhancing shelf life, and facilitating various processing techniques in the food industry.
editor by CX 2023-11-23
ES 
AR 
ZH 
EN 
FR 
DE 
IT 
JA 
KO 
PT 
RU