Fan Engine, 1/8 hp 120V 2.2 Amp 3-Speed
General Explanation: New fan motor, taken off unused 18” or 24” China Surroundings Compressor diameter TPI fans. Designed to operate an 18” or 24” enthusiast blade (blade NOT included).
This motor has a (detached) cord with grounded plug, motor capacitor and a 3-speed control switch. All the wiring in the middle of your electric electric motor, capacitor and quickness control switch is still installed however the cord itself is normally detached as observed in the photos. (Discover “Control Notice” below for modify type.)
T (See “Application Notice” below for make use of in various other applications.)
Dimensions: The engine body is 5” diameter and 3 ½” long (not including the shaft). The engine shaft is½” (0.500″) diameter x 2 ½” lengthy with a collection screw smooth. There are (4) threaded mounting lugs on leading of the motor, ½” lengthy x .16 dia. with washers and nuts. The studs may actually have got 4mm threads and to be on a 117mm (4.6”)diameter circle (3 ¼” measured from one stud to another).
Rate: The approximate electric motor speeds (with a enthusiast blade attached):1660, 1550 and 1370 RPM. Path of rotation (facing the shaft end of the electrical motor) is Clockwise.
Control Take note: Motors may come with The 3-swiftness rotating control KNOB OR a 3-speed PULL-CHAIN SWITCH (we have demonstrated BOTH versions in the images). These two types of switches both control the engine just as (but you have a rotating knob and you have a pull-chain). If you order several electric motor at a time, we can do our better to supply your order with each one sort of control or the additional.
Application Note: USUALLY DO NOT use this electric motor in a nonfan program. This is a totally enclosed fan electric motor and made to have continuous ventilation over the engine casing for cooling. The casing isn’t vented and the electric electric motor will overheat and enter automated thermal overload if operate in a nonfan program where there isn’t strong ventilation past the electric motor. (Caution Note: the electrical motor will restart immediately when it cools back off.) Using this electric motor for Electric Fan Motor applications aside from 18 & 24″ TPI fans may possibly also overload the engine and lead it to proceed into automated thermal overload. (Your companion blade from another producer may possess a steeper blade position.)
Origin: This electric engine is produced in China.