Vapor oil and fuel recovery vacuum pump Application
Vapor oil and gasoline recovery vacuum pump is a relatively consummate pump for oil-gasoline recovery, working below the ambient temperature at -forty~60°C. It can be used individually or as a part of oil-gas recovery system in gasoline stations, which is primarily utilized for oil-gasoline recovery, to lessen air pollution and conserve power.
With the developing requirement on getting benefit of environmental pollution and strength well, this Vapor oil and fuel recovery vacuum pump will be used to this area extensively.
Structural Characteristic
Characteristic of NP80 series oil-fuel restoration vacuum pump: a shaft dived by motor is mounted on the pump body, and its one particular conclude in the pump entire body is fixedly connected a crank which is jointed to a connection rod a piston in liner with reciprocating movement is set on the prime of the link rod, and the liner is fastened in the pump human body a valve seat assay above the piston has inlet valve and outlet valve which are verify valves. Besides, the inlet cavity and outlet cavity on the pump entire body are connected with the inlet valve and outlet valve respectively through a pipeline, the inlet cavity is connected with the coupling of an air eliminator, and one end of the coupling is linked with the hose through the hose coupling the hose with internal and exterior casing is related with nozzle.
Structure diagram:
Note: There are 6 electrical wires and five colors in WDVP-100
one) Blue ,white ,brown connect 380 Voltage energy.
2) There are two black electrical wires link 220 Voltage power. (One particular join 220 voltage electricity, another connect Zero)
3) The yellow one connects Serra.
four) The relaxation (blue, white, brown) needn’t connect.
5) Only two blacks manage the perform.
Specification
l Rotary vane vacuum pump
l Pump with motor, no impact the gas dispenser typical procedure
l Compact dimensions, self-lubricating Efficiency
Technological Specification |
||
Model |
Solitary PUMP Head |
Double Pump Head |
Max. Movement Price |
65 L/Min |
one hundred twenty L/Min |
Working temperature |
-twenty five~+fifty °C |
|
Max.Vacuum |
.07MPa |
|
Motor Speed |
2800RPM |
|
Motor Electrical power |
370W |
|
Power Provide |
380V/50Hz or 220V/50Hz |
|
Noise |
≤70dB |
|
Connection |
one/four” |
3/eight” |
Attributes
Straightforward set up and routine maintenance: eliminate the 4 screws to take away the pump head for simple installation and maintenance High vacuum degree assures clearing of flooded vapor hoses. Available for Self-contained Suction Pump Dispenser and submersible Pump Dispenser. Self-contained & single period two electrical power offer, safe and efficient. Handles twelve fueling positions with 6 nozzles in simultaneous full stream operation. Low sound, sluggish temperature rise.
1) Robust applicability: a tiny and strong structure, the pump head can be installed at numerous angles, supplying more ease for the modification of the tanker b applies to ethanol gasoline, methanol gasoline.
two) Lower noise layout: noise does not exceed 62 decibels.
three) Support lifestyle: Soon after stringent daily life and safety take a look at, the service life is ≥60000 hours.
4) Comprehensive protection steps: The fireplace escape valve is outfitted with inlet and outlet ports.
Bundle Knowledge |
Each Vacuum pump mounted by foaming,then in a carton.
|
|||
Model |
Size 1.026 |
N.W(kg) |
G.W(kg) |
|
Voltage |
Solitary/Double |
|||
380V |
Solitary |
365*275*245 |
twelve.32 |
13.05 |
|
Double |
490*275*245 |
14.22 |
14.ninety five |
220V |
Single |
430*275*245 |
fourteen.32 |
15.05 |
|
Double |
525*275*245 |
sixteen.22 |
16.95 |