DC MOTOR PUMP GROUP

DC MOTOR PUMP GROUP one
Standard Description
Consisting of a heavy duty DC motor as well as the CB1S gear pump, this pump motor group is surely an great hydraulic electrical power unit for mobile hydraulic equipments, such as car carriers, mobile aerial lifts, and backup techniques.
DC MOTOR PUMP GROUP two
Basic Description
This motor pump includes 4.5″ DC motor, a CBSR gear pump with built-in relief valve and verify valve.
DC MOTOR PUMP GROUP 3
Basic Description
This motor pump includes a four.5″ DC motor plus a CBSR gear pump which has a common power up/gravity down circuit having a relief valve, a test valve as well as a solenoid release valve.
Special Notes
1. This energy unit is of S3 duty cycle, i.e., non-continuous operation, thirty seconds on and 270 seconds off.
2. Clean the many hydraulic components concerned before mounting the electrical power unit.
three. Viscosity in the hydraulic oil shoud be 15~68 cst, which really should also be clean and cost-free of impurities. N46 hydraulic oil is advised.
four. The electrical power unit must be mounted horizontally.
five. The relief valve stress is preset about 25% higher compared to the operating pressure.
six. Flow control valve for lowing pace adjustment is available unpon request.