Aluminum-Bronze Screw Gears


Precision grade JIS quality N9 (JIS B1702-1: 1998) JIS quality 5 (JIS B1702: 1976)


portion of gear Normal plane

Gear teeth Standard complete depth


pressure angle 20°

Helix angle 45°

Material CAC702
① When mating screw gears made of the same materials they may cause abrasion and scoring. It is suggested to mate Screw Gears made up of different materials.

② The allowable torques shown in the table are the calculated Aluminum-Bronze Screw Gears values based on the assumed usage conditions.

③ The backlash values shown in the table will be the theoretical values for the backlash in the standard direction of a pair ofidentical gears in mesh.

④ For offset shaft applications, match a RH with a RH, or LH with a LH, to make a set of screw gears. For parallel shaft applications,

mesh opposing hands (RH and LH) of helical gear sets.

⑤ If the bore diameter is less than φ 4, then the bore tolerance class can be H8. If the bore diameter is certainly φ 5 or φ 6, and the hole length (total duration) exceeds three times the diameter, then your class is also H8.



Professional production Roots Vacuum Pumps, rotary vane pump, rotary piston pump, liquid ring vacuum pump, Oil-free Air Compressor, Screw Compressor, Scroll Compressor Manufacturer and Supplier.